Asphalt milling in Tampa
Controlled removal of damaged asphalt to the exact depth needed — preparing your surface for a flawless overlay or complete repaving.
Remove what's failed, keep what's solid
Asphalt milling is the process of grinding away the top layer of pavement using specialized equipment. It removes damaged, worn, or uneven asphalt at a precisely controlled depth — down to 1, 2, or 3 inches depending on the project requirements.
Milling is an essential step before resurfacing and overlays. It creates a clean, textured surface that new asphalt bonds to properly. Without milling, overlays can slip, crack at joints, and fail prematurely. Milling also maintains proper curb heights, drainage grades, and clearances at structures.
W&S Asphalt Paving operates milling equipment capable of handling everything from residential driveways to large commercial parking lots. Our machines cut to exact depth specifications and leave a grooved surface that's ideal for receiving fresh asphalt.
The removed material — called millings or RAP (Reclaimed Asphalt Pavement) — is fully recyclable. It can be used for temporary surfaces, shoulder stabilization, or recycled back into new asphalt mix. Nothing goes to waste.
Precision Depth Control
Our milling equipment removes asphalt at exact specified depths — 1 inch, 2 inches, or full-depth — with consistent results across the entire surface.
Better Overlay Bond
Milled surfaces create a rough, textured profile that new asphalt grips to. This prevents slippage and extends the life of your overlay.
Grade & Height Correction
Milling lets us maintain proper curb reveal, drainage slope, and door clearances — critical for commercial properties.
100% Recyclable
Removed asphalt millings are recycled into new pavement material or reused for temporary surfaces. Zero waste to landfill.
When milling is the right solution
Before Resurfacing
Milling creates the ideal bonding surface for overlays and maintains proper elevation after new asphalt is applied.
Height Correction
When multiple overlay layers have built up over the years, milling brings the surface back to the correct elevation.
Drainage Restoration
Milling can re-establish proper slope and grade to eliminate standing water caused by uneven surfaces.
Partial Removal
Remove only the damaged top layer while preserving a solid base — saving time and money on repair projects.
Full-Depth Removal
Complete asphalt removal down to the base when pavement has failed beyond repair. Faster and cleaner than traditional demolition.
Material Recycling
Reclaimed asphalt pavement (RAP) from milling is recycled into new hot-mix or used for temporary surfaces and shoulders.
Milling — clean, controlled, efficient
Professional milling that sets the foundation for a perfect finished surface.
Survey & Plan
We assess the existing surface, determine the required milling depth, and plan the work sequence to minimize disruption.
Milling
Our milling machine removes asphalt at the specified depth. Continuous conveyors load millings directly into trucks for removal or recycling.
Cleanup
The milled surface is swept clean and inspected for proper depth, grade, and texture. Any soft spots in the base are identified and addressed.
Ready for Paving
Tack coat is applied and the surface is ready for fresh asphalt. Most milling and paving projects are completed back-to-back.
Common questions
What you should know about asphalt milling.
Start with a clean surface.
Get a free estimate for milling and resurfacing your property.
Get Your Free Estimate → (813) 685-4708